| Equipment Name | 800℃ Series Vacuum Atmosphere Pit Furnace (Water-cooled) |
| Model | 10L |
| Max. Working Temperature | 800℃, stable long-term operation |
| Normal Working Temperature | 600~700℃ |
| Temperature Control Accuracy | ±1℃, no overshoot |
| Constant Temperature Accuracy | ±1℃ |
| Temperature Uniformity | ±3℃ (subject to heating chamber size) |
| Temperature Protection Range | 50℃~800℃ |
| Power Supply | AC 380V |
| Rated Power | 20KW |
| Effective Heating Chamber Size | Depth 250mm × φ250mm |
| Installation Dimension | Height 2m; Width ≤1.2m; Length ≤1.5m, final drawing confirmed by both parties |
| High-temp Working Condition | Nitrogen positive pressure 50–200Pa controllable, accuracy ±10Pa; Pressure rise ≤10Pa within 24h under negative pressure |
| Atmosphere | Nitrogen, Argon and other inert gases |
| Temperature Sensor | Type N thermocouple, RT~1000℃; Total 4 pcs, 3 for control, 1 inside inner crucible |
| Temperature Zones | Upper, Middle, Lower three independent zones; Cylindrical cavity, three-layer annular heating wire for uniform heating |
| Heating Rate | Adjustable; Max 20℃/min (non-linear), Min 1℃/h |
| Cooling Rate | Natural cooling below 500℃; ≤10℃/min above 500℃, programmable cooling |
| Heating Element | HRE alloy resistance wire, 0Cr27Al7Mo2 |
| Heating Element Position | Evenly arranged around furnace chamber |
| Lining Material | Multi-layer alumina ceramic fiber; Vacuum formed high-purity lightweight alumina fiber, low heat storage, good thermal shock resistance |
| Furnace Body | CNC machined, polished, pickled, phosphated, powder coated; Double shell, outer shell Q235 carbon steel; Air cooling structure |
| Shell Temperature | Rising temperature < Ambient +30℃ under continuous running |
| Crucible & Inner Pot | Outer pot: SUS316L, thickness ≥5mm; Inner pot: N6 nickel, thickness ≥3mm, φ250×250mm; Volume ≥10L, feeding ≥7.5L, detachable for cleaning |
| Stirrer | 3-layer frame stirrer, N6 nickel; Bottom paddle 10±1mm from bottom, top paddle at 60% height; Gap 10±1mm to wall; Height adjustable; Welded bellows seal; Magnetic fluid drive; Speed 5–100r/min gradient adjustable; Speed & forward/reverse linked with sintering curve |
| Furnace Lid | Quick-open flange, high temp FKM O-ring with cooling water channel; Automatic top opening (screw/cylinder), limit protection; Lid lifting motor, stirrer lifts and can be moved sideways |
| Control System | 10” Touch Screen + Siemens PLC; Sichuan Yingjie IGBT module, constant I/V/P; 50-segment program, store 15 sintering curves; PC real-time monitoring; Dual-loop control & protection; Parameter retention after power loss, data & alarm log exportable, saved for 3 months; Protection: thermocouple break, phase loss, overvoltage, overcurrent, overtemperature, soft start etc. |
| Gas Inlet | Mass flow meter, programmable inlet time & flow |
| Vacuum Pump | Two-stage direct-drive rotary vane pump; Only for gas replacement; Cycle: evacuate → fill N₂ → evacuate → fill N₂ |
| Pressure Resistance & Control | Plate 6–20mm, double-sided welding, withstand +20kPa; Stable pressure 50–250Pa; -1000Pa~1000Pa transmitter, PLC control; Operation height ~1.35m |
| Gas Valves | Imported stainless steel valves |
| Mass Flow Meter | Range 0–10L/min |
| Exhaust Port | Electric exhaust port, automatic pressure relief |
| Oxygen Analysis | 0–10%; Pre-filter; O₂<10ppm before heating; O₂≤5ppm at 700℃; Manual / auto mode switch |
| Pressure Indication | Dual digital gauge for positive & negative pressure |
| Water Cooling | Cooling water:15–25℃,0.1–0.2MPa,>1m³/h; Chilled water 7℃,<1m³,<0.4MPa, insulated pipe; Cooling on furnace lid; Auto shutoff by temperature to avoid condensation |
| Tar Collector | ≥5L, threaded detachable, transparent level indicator, cooling jacket, anti-leak valve; Installed at lowest point of pipeline, clip connection |
| Dew Point Monitoring | Dew point meter on exhaust branch, replaceable pre-filter |
| Exhaust System | Exhaust temp ≤80℃, insulated pipe; Explosion-proof fan, PLC linked, slide valve for pressure regulation; SUS316L pipe to avoid tar blockage |
| Pressure Protection | Alarm at 500Pa; Auto close inlet, open exhaust, sound & light alarm, stop N₂ supply; Exhaust to tar pipeline; Prioritize exhaust adjustment, fan interlock to prevent negative pressure |
| Program Protection | Real-time monitor chilled water temp, exhaust temp, furnace temp, furnace pressure; Alarm & safety action when exceeding threshold |
| Mobility & Lifting | 4 sets of Fuma casters, 4 lifting holes reserved |
| Application | University, research institute, factory; sintering, melting, analysis & small batch production for ceramics, metallurgy, electronics, new materials, metals & compounds |