1400°C Pit Furnace (Independent Temperature Control Cabinet)

1400°C pit furnace with independent temperature control cabinet, 24 silicon carbide heating elements, electric lift & 90° translation door, 7-inch touch PID controller, 3-layer insulation for high-temperature sintering and heat treatment.

Pit Furnace

1400°C Pit Furnace (Independent Temperature Control Cabinet)

Temperature Grade:1400℃
Power Supply:AC 380V
Power:60KW
Long-term Service Temperature:≤1350℃
Temperature Control Range:80~1400℃
Temperature Sensor:Type S thermocouple

Product Video

1. Excellent Temperature Uniformity 24 silicon carbide rods arranged in a cross-grid layout around the chamber, denser at the top, achieving ±3°C uniformity; S-type thermocouple ensures precise high-temperature measurement.

2. 7-Inch Smart Touchscreen Chinese/English switchable with auto-tuning PID and over-temperature alarm. Stores 16 process recipes, each with 31 segments; automatic heating, holding and stop. Real-time curve recording with USB data export — reports can be viewed and printed on a computer.

3. Ultra-Wide Ramp Range From a fast 50°C/min (nonlinear) down to 1°C/h, covering everything from rapid melting to precision annealing.

4. Electric Door, Energy-Saving & Safe Electric door rises and automatically swings 90° for effortless operation. Three-layer insulation saves over 80% energy versus conventional furnaces, shell temperature stays below 45°C, with dual-loop multi-protection and a 1-year free warranty.

ItemSpecification
Temperature Grade1400℃
Power SupplyAC 380V
Power60KW
Furnace Chamber Sizeφ350mm × H550mm; Custom heat shield for furnace opening, final size confirmed with customer
Max. Working Temperature1400℃
Long-term Service Temperature≤1350℃
Temperature Control Range80~1400℃
Temperature SensorType S thermocouple
Heating Elements24 pcs SiC heating elements, φ25; Well-shaped staggered layout around chamber, uneven spacing vertically, denser at upper section for better temperature uniformity
Lifting310S lifting fixture supplied; Cantilever to be provided by customer
Temperature Control System7-inch touchscreen PID controller, bilingual (CN/EN), auto-tune, overtemperature alarm; 16 storage recipes, 31 segments per recipe; auto ramp, soak & stop; built-in data logging, USB export, report preview & printing on PC; Control accuracy ±1℃
Temperature Uniformity±3℃ (subject to chamber dimension)
Heating RateAdjustable; Max 50℃/min (non-linear), Min 1℃/h
Furnace StructureAir-cooled double-layer furnace body with air guide partition. Cold air circulates to cool conductive strips before exhaust to avoid oxidation
Furnace DoorElectric lifting + automatic 90° horizontal translation
Refractory LiningVacuum formed high-purity lightweight alumina material
InsulationThree-layer insulation: aluminosilicate fiber board, alumina fiber board, polycrystalline alumina fiber board, energy saving ≥80% compared with old furnaces
Shell Temperature<45℃ under continuous non-stop operation
ProtectionIntegrated control module, dual-loop control & protection; protection against overshoot, undershoot, thermocouple break, phase loss, overvoltage, overcurrent, overtemperature, current feedback, soft start
Control ModeClosed-loop SCR control, phase-shift or zero-cross triggering; constant voltage / constant current / constant power, current limiting protection
Accessories1 crucible tong, 1 pair of high-temperature gloves
Warranty1 year free warranty from shipment date; heating elements excluded
Notes1. Recommended ramp rate: 1–20℃/min, faster rate shortens heater life2. Not vacuum-sealed, flammable & explosive gas prohibited3. Minor cracks on lining are normal, repairable with alumina coating4. Corrosive gas is not recommended; notify us in advance for S, Na etc. for special lining treatment5. Prevent molten solution leakage to furnace bottom; use plate or alumina powder6. Install in ventilated and dry location
Connect with Us Today
Phone Phone:+86-13937922703
Email Email:luoyanganjing@gmail.com