1200°C Vacuum Atmosphere Pit Sintering Furnace

ZQJ series 1200°C vacuum atmosphere pit sintering furnace, diffusion pump high vacuum system, 310S stainless steel retort, 7-inch touchscreen with 50-segment program control for ceramic and metal sintering.

Pit Furnace

1200°C Vacuum Atmosphere Pit Sintering Furnace

Temperature Grade:1200℃
Vacuum Degree:10⁻³ Pa
Chamber Size:φ600mm × Depth 1000mm
Long-term Service Temperature:1150℃
Temperature Control Range:50~1200℃
Gas Inlet:1 pc

Product Video

  • The ZQJ series 1200°C vacuum atmosphere pit electric furnace is shown in the figure. It integrates a temperature control system, vacuum metal furnace chamber, vacuum pump, gas circuit, pressure protection, gas flow control, positive/negative pressure display, and water circulation pump. The water circulation tank and the furnace body are separate. The furnace lining is made of vacuum-formed high-purity alumina lightweight material.
  • It uses high-temperature U-shaped equal-diameter silicon carbide rods as heating elements; it is a dedicated device specially developed for laboratories of higher education institutions and research institutes, as well as industrial and mining enterprises, to perform sintering, melting, analysis, and production on ceramics, metallurgy, electronics, glass, chemicals, machinery, refractory materials, new material development, special materials, building materials, metals, non-metals, and other chemical compound materials.
  • The control panel is equipped with an intelligent temperature regulator, control power switch, main heating start/stop button, voltage and current meters, computer interface, water pump switch, vacuum pump switch, gas flow meter, positive/negative pressure gauge, electric contact pressure gauge, and valves, so as to observe the working status of the system at any time. This product adopts a reliable integrated circuit, provides a good working environment, and is anti-interference. During operation, the outer shell temperature of the furnace body is ≤40°C, which greatly improves the working environment. Microcomputer program control, programmable curves, fully automatic heating/cooling, and the temperature control parameters and programs can be modified during operation, which is flexible and convenient, and easy to operate.
  • Temperature control accuracy: ±1°C without overshoot; constant temperature accuracy: ±1°C. Fast heating speed, heating rate ≤45/min.
  • The furnace chamber material is made of vacuum-formed alumina lightweight material, which has high service temperature, small heat storage, resistance to rapid heating and cooling, no cracking, no slag falling, and good thermal insulation performance. The structure is reasonable, with inner and outer double-layer furnace sleeves and air-cooled heat dissipation, which can greatly shorten the test cycle.
ItemSpecification
Temperature Grade1200℃
Chamber Sizeφ600mm × Depth 1000mm
Vacuum Degree10⁻³ Pa
Inner Vessel2 sets with lid, thickness 12mm; SUS310S, sealed type, removable at high temperature
Power SupplyAC 380V
Rated Working Temperature1200℃
Long-term Service Temperature1150℃
Temperature Control Range50~1200℃
Gas Inlet1 pc
Temperature SensorType K thermocouple, 0-1320℃, measuring inside inner vessel
Heating ElementHigh temperature alloy resistance wire
Heating Element PositionArranged around chamber, protected by corundum-mullite
Heating Element ReplacementIntegral hoisting, separate barrel cover after removing fasteners, restore after replacement
Temperature Control Accuracy±1℃ (Integrated circuit control, no overshoot)
Temperature Uniformity±1℃ (Subject to chamber size; multi-point control for large furnace for better uniformity)
Heating RateAdjustable; Max 20℃/min, Min 1℃/h
Furnace BodyCNC machined, polished, pickled, phosphated, powder coated and baked; Two-tone appearance, anti-oxidation, acid & alkali resistant, corrosion resistant, high temperature resistant, easy to clean
Furnace StructureDouble-layer air-cooled shell, combined air cooling + water cooling
Water Cooling PositionFurnace opening and furnace door
Vacuum UnitDiffusion pump set, ultimate vacuum 6.6×10⁻⁴ Pa
Vacuum GaugeAnalog gauge (-0.1MPa), digital compound vacuum gauge, digital pressure gauge
Vacuum PipelineComplete gas circuit and valves
Pressure Rise Rate0.66Pa/h
Pressure DetectionDigital pressure detector
Mass Flow Meter1 digital mass flow meter
Pressure ProtectionSignal from pressure gauge/sensor; auto close gas inlet, open exhaust valve, sound & light alarm for pressure relief
Available AtmosphereHydrogen, Nitrogen, Argon, CO, Oxygen, etc.
Refractory LiningVacuum formed high-purity lightweight alumina material; Light corundum-mullite for furnace opening & bottom; low heat storage, thermal shock resistance, no crack or slag falling
InsulationThree-layer insulation: aluminosilicate fiber board, alumina fiber board, polycrystalline alumina fiber board
Shell Temperature<45℃ under continuous non-stop operation
Protection FunctionsIntegrated control module, dual-loop control & protection; protection against overshoot, undershoot, thermocouple break, phase loss, overvoltage, overcurrent, overtemperature, current feedback, soft start
Control ModeClosed-loop SCR control, phase-shift or zero-cross triggering; constant voltage / constant current / constant power with current limiting protection
Display ContentsTemperature, segment No., segment time, remaining time, output power %, voltage, current
Push ButtonsImported buttons, service life>100,000 times with LED indicator
Temperature ControllerIntelligent controller with PID/APID/MPT, auto-tune & auto-learn, no overshoot; ramp/soak/cycle/pause, online modification, smooth curve fitting
Program Segments50-segment program control, multiple curves stored
Touch Screen7-inch touch screen
Connect with Us Today
Phone Phone:+86-13937922703
Email Email:luoyanganjing@gmail.com