| No. | I. | Application: Furnace lining for high-temperature furnaces, thermal insulation and electrical insulation materials for heating devices of instruments and equipment; lining materials for various high-temperature furnaces | |
| 1 | II. | This product is made of alumina, silica and mullite as main raw materials, compounded with fillers and binders, and formed by suction-pressure combined molding. Compared with commercially available calcined fiber products and lightweight insulating bricks, it has good machinability, large panel size, low thermal conductivity and low bulk density. Large panels and special-shaped products can meet the requirements of maximum 1450℃ and long-term 1400℃. It has been used to replace imported products in many electric/gas kilns with good energy-saving effect and reduced operating cost. | |
| 2 | III. | Parameter | Product Performance | |
| 3 | Max. service temperature | 1450℃ | |
| 4 | Long-term service temperature | 1400℃ | |
| 5 | Bulk density, g/cm³ | 450-1000 | |
| 6 | Thermal conductivity W/m•K | 450 | 500 | 600 | 700 | 800 | 1000 |
| 7 | | 0.15 | 0.16 | 0.18 | 0.2 | 0.22 | 0.24 |
| 8 | Linear change after heating for 12h, % | 1100 | | | | | | |
| 9 | 1200 | | | | | | |
| 10 | 1250 | | | | | | |
| 11 | 1300 | ≤0.4 | ≤0.4 | ≤0.3 | ≤0.3 | ≤0.3 | |
| 12 | 1350 | ≤0.5 | ≤0.4 | ≤0.4 | ≤0.4 | ≤0.4 | ≤0.3 |
| 13 | 1400 | ≤0.8 | ≤0.7 | ≤0.7 | ≤0.6 | ≤0.6 | ≤0.5 |
| 14 | 1450 | ≤1 | ≤0.9 | ≤0.9 | ≤0.8 | ≤0.8 | ≤0.6 |
| 15 | 1500 | ≤4 | ≤4 | ≤3.8 | ≤3.7 | ≤3.6 | ≤3.2 |
| 17 | Main chemical index | Al₂O₃ | ≥48-60% |
| 18 | SiO₂ | ≥40-48% |
| 19 | Fe₂O₃ | ≤0.8% |
| 20 | NaO₂ | ≤0.8% |
| 21 | K₂O | ≤0.6% |
| 22 | CaO₂ | ≤0.5-1% |
| 23 | IV. | Product Size | Standard size (L*W*H):1000×600×65 (mm), other sizes can be customized according to customer requirements |