The product is formed by suction-pressure combined molding process with polycrystalline alumina fiber as the main raw material, compounded with fillers and binders. Compared with commercially available calcined fiber products, it features good machinability, low thermal conductivity and low bulk density. FR1800 fiber boards and special-shaped products can withstand a maximum temperature of 1800℃ and long-term service at 1750℃. They have replaced imported products in numerous kilns, delivering excellent energy-saving performance and reducing operating costs.
| Model & Parameter | FR-1000 | FR-1260 | FR-1420 | FR-1500 | FR-1600 | FR-1700 | FR-1800 | FR-1850 |
|---|---|---|---|---|---|---|---|---|
| Max. service temperature, ℃ | 1000 | 1260 | 1420 | 1500 | 1600 | 1700 | 1800 | 1850 |
| Long-term service temperature(furnace temperature), ℃ | 950 | 1200 | 1350 | 1450 | 1550 | 1650 | 1750 | 1800 |
| Bulk density, kg/m³ | 300-600 | 300-600 | 400-700 | 400-700 | 400-700 | 400-700 | 450-700 | 500-700 |
| Thermal conductivity, W/(m·K) @1200℃ | 0.14 | 0.145 | 0.155 | 0.15 | 0.155 | 0.16 | 0.17 | 0.2 |
| Linear shrinkage on heating, % | ||||||||
| @1000℃ | ≤1 | / | / | / | / | / | / | / |
| @1200℃ | / | ≤0.5 | ≤0.2 | / | / | / | / | / |
| @1400℃ | / | / | ≤1 | ≤0.2 | / | / | / | / |
| @1500℃ | / | / | / | ≤1 | ≤0.2 | / | / | / |
| @1600℃ | / | / | / | / | ≤2 | ≤0.3 | / | / |
| @1700℃ | / | / | / | / | / | ≤2 | ≤0.6 | ≤0.8 |
| @1800℃ | / | / | / | / | / | / | ≤2 | ≤0.5 |
Used as thermal insulation and electrical insulating materials for linings of high-temperature electric furnaces and heating assemblies of equipment; also as lining materials for tunnel kilns and roller kilns.
Standard size (Length × Width × Thickness): 900×600×30-100 mm, 1000×600×30-100 mm
The technical data are average values obtained under specified test standards and may fluctuate within a certain range. These figures shall not be regarded as product warranty data.